Coleman 8350 Series Guía de usuario descargar pdf (Pagina 39)

Making Detailed Adjustments 39

■ Block NR (Home Cinema 8700 UB only)

Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 28) or

with a signal input through the PC port.

This setting reduces block noise that can appear when projecting MPEG images that have

been compressed at a low bit rate.

■ 2-2 Pull-down (Home Cinema 8350 only)

Note: This setting can be used only when viewing a 1080p/24Hz signal input through the

Component, HDMI 1, or HDMI 2 ports (see page 67). This setting cannot be used when the

Color Mode is set to x.v.Color (see page 28) or with a signal input through the PC port.

This setting allows you to select whether images are projected with 2-2 pulldown

detection or 2-3 pulldown detection. Select

On for 2-2 pulldown detection.

■ 4-4 Pull-down (Home Cinema 8700 UB only)

Note: This setting can be used only when viewing NTSC, M-PAL, or PAL60 signals input

through the Video or S-Video ports, or 480i, 1080i/60Hz, or 1080p/24Hz signals input through

the Component, HDMI 1, or HDMI 2 ports (see page 67). This setting cannot be used when the

Color Mode is set to x.v.Color (see page 28) or with a signal input through the PC port.

This setting allows you to select whether images are projected with 4-4 pulldown

detection or 2-3 pulldown detection. Select

On for 4-4 pulldown detection.

■ Frame Interpolation (Home Cinema 8700 UB only)

This setting compares the current and previous frames, then creates a frame between

them to reduce fuzziness and produce clearer moving images. You can select from 3 levels

of frame interpolation.

Note: This setting cannot be changed while the 4-4 Pull-down setting is turned on.

Signal > Advanced > Block NR

Signal > 2-2 Pull-down

Signal > 4-4 Pull-down

Signal > Frame Interpolation

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 79 80

Sin comentarios

Coleman 8350 Series Guía de usuario Pagina 39